Our company has excellent technical personnel, including advanced and reliable means of processing, including laser technology. It can provide users with all kinds of services such as design, manufacture, guidance and installation of various tower parts according to different column diameters and different mass transfer needs, so as to meet users' different needs. The company can carry out the experiment of fluid mechanics to ensure the quality of the product. There are several kinds of inner parts produced by our company as follows:
The liquid distributor and redistributor include the trough liquid distributor, the disc type liquid distributor, the tank tray type gas liquid distributor, and the pipe type liquid distributor.
Trough Type Liquid Distributor
The trough type liquid distributor is a gravity type liquid distributor. It has excellent comprehensive properties: multi-function, low occupancy, anti fouling, anti entrainment, high elasticity, rising liquid level, flash evaporation, suitable extraction, heat transfer, liquid leakage, uniform gas distribution, uniform liquid distribution, mixing and leveling, pressure reduction, saving investment and wide application.
Initial Inlet Distributor
In a large packing tower with low pressure or pressure relief operation, the effect of the initial inlet distributor is particularly important. Through experimental research and production practice, we have screened three types of initial distributor with excellent performance:
<1>Initial radiant inlet distributor
<2>Double Tangential circulation inlet distributor and new double tangential circulation or initial inlet distributor
<3>A double row blade inlet distributor and a new double row blade initial distributor. The radial intake distributor is an initial distributor of axisymmetric three-dimensional, diversion and radiative air intake. It is the latest development of radial intake distributor. Its test results in the diameter 1000 of the tower show that it has a better comprehensive performance.
In the packing column, the liquid collector is required to be collected and redistributed between the two sections of the packing, and the liquid is added to the column. Another function of it is to mix the liquid from the different radial positions in the column to the same composition of the liquid entering the next layer. Our company mainly produces the shaded liquid collector and the lift pipe type liquid collector.
The demister is used to separate the droplets entrained in the column to ensure mass transfer efficiency, reduce valuable material losses and improve the operation of the compressor behind the column. It can effectively remove the droplets of 3--5um. If the demister is set in the tray, it can not only ensure the mass transfer efficiency of the tray, but also reduce the spacing of the plate.
Xinjiang Dushanzi Tianli High-tech Company
Diacid, adipic distillation tower
Kyivida billion petrochemicals
Xinjiang Yili Xintian Co., Ltd.
Cold East Station Distillation System Installation of 2 Billion NM3 Coal-to-Gas Project
Fushun Petrochemical Research Institute
60t/a high vacuum distillation device
Zibo Xintai Petrochemical Co., Ltd.
500,000 tons vacuum distillation unit
Xinjiang Jimuna Guanghui LNG Co., Ltd.
150NM3/D rectification device
Zhejiang Huahai Pharmaceutical Co., Ltd.
Ethyl acetate and methanol distillation
China Tianchen Engineering Co., Ltd.
5.5 million tons/year BDO project
Zhenjiang Jiangnan Chemical Co., Ltd.
50,000 tons/year trichlorosilane distillation device
Suzhou Ruihuan Chemical Co., Ltd.
Shanna Synthetic Rubber Co., Ltd.
Acetylene Water Cooling Tower Internals
Yantai Wanhua Polyurethane Co., Ltd.
Beijing Huafu Engineering Co., Ltd.
Change gas methanol wash tower, etc.
ISO 9001:2008 Quality Management System Certificate
Zupak Packing as Golden Award of New Technology & New Equipment & New Material
Hi-Tech Enterprise Certificate
Research & Extension Center of National Chemical Packing Colum & Internal Technology
Golden Award of China Patented Technology Expo